SmartLink by Weathermatic   |    Catalogs    |    Support

Weathermatic
Weatherematic
CATALOGS   |   SUPPORT SmartLink by Weathermatic
Weathermatic

MAX-PRS Spray Head Technical Specification

Table of Contents
FileAction
Technical Specs – MAX-PRS Spray Head.pdfViewDownload

 FEATURES

  • Five year warranty
  • In stem pressure regulator set to 30 psi or 40 psi
  • Dual pressure-activated seal (cap to flow tube and cap to body)
  • Easy grip threaded cover
  • Stainless steel “super strength” retraction spring
  • High-strength ribbed design
  • Large self-cleaning check valve (CV)
  • Optional check valve (CV)
  • Optional non-potable (MP) cap

QUICK INSTALLATION

  • Directional flush cap on every head
  • Side and bottom inlets on LX6 and LX12*
  • Ratchet nozzle alignment

* Side inlet installation on LX6 and LX12 is not recommended in freezing climates.

NOZZLES

  • Completely compatible with all industry-standard female thread nozzles
  • MPR nozzles
  • Adjustable Arc nozzles
  • B Series brass nozzles

OPERATING DATA

  • Pressure range: 15 to 70 psi (1,0 to 4,8 bars)
  • Flow-by: Zero at 5 psi (0,3 bars) or greater
  • Factory installed check valve: 14 ft/hd at 18 psi (4.3 m/hd at 1,2 bar). Specify: MAX4-CV, MAX6-CV, or MAX12-CV
Go to Top