File	Action
Technical Specs – SCZ-MAX-DW-10.pdf	Download

FEATURES

1” MAX-DW-10F Valve

• 10-year warranty and 100% water tested
• 225 psi (15, 5 bar) rating
• S24B high-efficiency solenoid for positive opening at high pressures. Stainless steel actuator and brass threads
• Unique “reverse flow” porting design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure providing zero stress to prevent “stretching,” a common cause of valve failure
• Diaphragm’s self-cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
• Molded shock cone for smooth operation and reduction of water hammer
• Easy-to-use internal manual bleed lever; bleeds valve downstream; has stops for open and closed positions
• High-strength glass-filled body and cover with ¼ in. stainless steel cover bolts and mating brass body inserts
• Non-rising flow control stem throttles valve from full open to closed position
• Chloramine resistant diaphragm

1” Wye-Filter Regulator

• Constructed of heavy duty glass filled nylon which operates between 20-150 psi pressure rating
• Pre-assembled with a 200 mesh stainless steel screen element – Manual flush cap allowing for filter element flush
• Directional flow arrows molded into body
• Nominal pressure regulation of 40 psi – (2.8 bar)

ELECTRICAL

• Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups
• 24VAC/60 Hz 24 VAC/50 Hz
• Inrush: 9.86 VA Inrush: 10.7 VA
• Holding: 5.69 VA Holding: 7.5 VA
• Do not use nominal voltage ratings listed above for sizing of valve wires

OPERATION

• Flow: – 0.20 to 15.0 gpm
• Filtration: 200 mesh stainless steel

DIMENSIONS

7” H x 10 ¼” L x 3” W

MODEL

SCZ-MAX-DW-10 – 1” MAX-DW-10F Valve; 1” Wye-Filter/Regulator (40 PSI)