ProLine Controllers
SLFA, SLF-COMBIFLOW, SLF-ISOFLOW, SLF-WIRERIDE
Expand the flow capabilities of your SmartLink system
SLFA FLOW ASSEMBLIES
- Pre-sized with manufacturers required pipe length
- Includes master valve, flow sensor, schedule 80 pipe length and flanges and gasket/bolt kits
- Avoid errors in flow run pipe length size and fitting assembly
- Ready to glue and install
Downloads
SLF-COMBIFLOW FLOW PROCESSOR
The SLF-Combiflow is a unique signal controlled device that conditions and scales the signals from two digital flow sensors and combines them into one scalable digital output. The SmartLink®™ Flow Aircard then perceives the signal is coming from a single flow sensor. It is compatible with the SLFSI Series Flow Sensors and most other sensors producing a square or sine wave output proportional to the rate of flow.
SLF-ISOFLOW SIGNAL CONTROL DEVICES
The SLF-ISOFLOW-302 and SLF-ISOFLOW-304 are signal control devices that receive the signal from a single SLFSI flow sensor and provide two electrically isolated outputs. These outputs can then separately be connected to 2 – 4 SmartLink® Flow Aircards.
The SLF-ISOFLOW-304 enables up to 4 SmartLine®/SmartLink® Flow Aircard to share a single SLFSI flow sensor.
SLF-WIRERIDE
The SLF-WIRERIDE enables installation of a new master valve and flow sensor (or hydrometer) on an irrigation system, without the need of running new wire back to the irrigation controller. With WireRide, the new master valve and flow sensor (or hydrometer) essentially “hitch a ride” back to the controller using a nearby preexisting zone wire.
MODELS & PRODUCT SPECIFICATIONS
SLFA
Models
SLFA-T10-MAX – 1″ Flanged Flow Assembly with MAX-DW-10 Master Valve and SLFA-T10 Flow Sensor
SLFA-T15-MAX – 1 1⁄2″ Flanged Flow Assembly with MAX-DW-15 Master Valve and SLFA-T15 Flow Sensor
SLFA-T20-MAX – 2″ Flanged Flow Assembly with MAX-DW-20 Master Valve and SLFA-T20 Flow Sensor
SLF-COMBIFLOW
Models
SLF-COMBIFLOW-100 – Combines 2 separate flow Sensor’s data to be used by 1 SmartLink® Flow Aircard
SLF-COMBIFLOW-100-10-10 – Combiner for 2 sensors / 1 controller – Pre-programmed 1″ x 1″
SLF-COMBIFLOW-100-15-10 – Combiner for 2 sensors / 1 controller – Pre-programmed 1.5″ x 1″
SLF-COMBIFLOW-100-20-10 – Combiner for 2 sensors / 1 controller – Pre-programmed 2″ x 1″
SLF-COMBIFLOW-100-30-10 – Combiner for 2 sensors / 1 controller – Pre-programmed 3″ x 1″
SLF-COMBIFLOW-100-15-15 – Combiner for 2 sensors / 1 controller – Pre-programmed 1.5″ x 1.5″
SLF-COMBIFLOW-100-20-15 – Combiner for 2 sensors / 1 controller – Pre-programmed 2″ x 1.5″
SLF-COMBIFLOW-100-30-15 – Combiner for 2 sensors / 1 controller – Pre-programmed 3″ x 1.5″
SLF-COMBIFLOW-100-20-20 – Combiner for 2 sensors / 1 controller – Pre-programmed 2″ x 2″
SLF-COMBIFLOW-100-30-20 – Combiner for 2 sensors / 1 controller – Pre-programmed 3″ x 2″
SLF-COMBIFLOW-100-30-30 – Combiner for 2 sensors / 1 controller – Pre-programmed 3″ x 3″
SLF-ISOFLOW
Models
SLF-ISOFLOW-302 – Enables 2 SmartLink® Flow Aircards to share 1 SLFSI Flow Sensor
SLF-ISOFLOW-304 – Enables 3 to 4 SmartLink® Flow Aircards to share 1 SLFSI Flow Sensor
SLF-WIRERIDE
Models
SLF-WIRERIDE – Add SLFSI Flow Sensor and a Master Valve Without Running New Wire to the Controller
SLF-WIRERIDE-HYD – Hydrometer Communication on Existing Wire
OTHER ACCESSORIES
Models
SLF-SIMFLOW -Flow Simulator with 36″ Leads
SLF-DISPLAYFLOW – Digital Display Totalizer Inhousing
SLFLOW-WIRE-193-1000 – 19 Gauge, 3 wires, 1000 ft
SLF-PCT-120 – Hydrometer Pulse Converter
