Project Description
Silver Bullet Series
Residential/Commercial Valve
FEATURES
- 5 year trade warranty and 100% water tested
- 150PSI (10.3 BAR) rating
- Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure
- Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
- Molded shock cone for smooth operation and reduction of water hammer
- Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
- Marine-grade S20P solenoid with stainless steel actuator
- High-strength glass-filled nylon body and cover with 1⁄4″ stainless steel cover bolts and mating brass body inserts
- Non-rising flow control stem throttles valve from full open to closed position on flow control models
- Pressure activated diaphragm
- Valve identification system
WATER WITH PURPOSE
100 gallons
per valve
MODELS
SB-10-HP
SB-10F-HP
SB-15-HP
SB-20-HP
PRODUCT SPECIFICATIONS
| Model | Description |
|---|---|
| SB-10-HP | 1″ 24 VAC |
| SB-10F-HP | 1″ 24 VAC with Flow Control |
| SB-15F-HP | 1 1/2″ VAC with Flow Control |
| SB-20F-HP | 2″ VAC with Flow Control |
DIMENSIONS
5” L x 3.13″ W x 4.75″ H (12.7 cm x 7.95 cm x 12.07 cm)
FLOW RANGE
0.2 to 180 GPM (0 to 3.5 m3/hr)
ELECTRICAL
24VAC/60HZ 24VAC/50Hz
Inrush: 9.48 VA Inrush: 10.66 VA
Holding: 5.11 VA Holding: 5.97 VA
Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups
