Project Description
D50/D55 Series
Golf Rotor

FEATURES
- Bayonet protective cap.
- NIR2 feature (Nozzle Insertion/Radius Reduction) on all models eliminates the need to remove the cap for nozzle adjustments.
- Six interchangeable Acu-Cover nozzles ranging from 5.6 to 19.6 gpm (1,27 – 4,45 m3/hr).
- Rubber cap has two locking screws for vandal protection.
- Click-Set® collars are quick and easy to adjust.
- Gear drive may be installed 1⁄2” (1,3 cm) below grade.
- Proven reliability of the water driven gear motor.
- Continuous 360° rotation or part-circle adjustable 40° to 310°.
- Heavy-duty case with stabilizer ribs increases stability even in loose soil.
- Ratcheting slip clutch protects gears and motor from damage while adjusting turret for part-circle adjustments – wet or dry.
- Wrench, piston clamp and installation instructions included.
WATER WITH PURPOSE
MODELS

D50 Series
Golf Rotor

D55 Series
Golf Rotor
PRODUCT SPECIFICATIONS
Model | Description |
---|---|
D50C25A* | 1″ Full Circle Rotor with Check Valve, Acme |
D50E2570A* | 1″ Full Circle Rotor, Electric VIH, Acme |
D50H25A* | 1″ Full Circle Rotor, Hydraulic VIH, Acme |
D50B25A* | 1″ Full Circle Block Rotor, with Check Valve Acme |
Model | Description |
---|---|
D55C25A* | 1″ Part Circle Rotor with Check Valve, Acme |
D55E2570A* | 1″ Part Circle Rotor, Electric VIH, Acme |
D55H25A* | 1″ Part Circle Rotor, Hydraulic VIH, Acme |
D55B25A* | 1″ Part circle Block Rotor, with Check Valve, Acme |
D55XC2514A* | 1″ X-Series Dual Nozzle/Part Circle Rotor, with Check Valve, Acme |
D55XE251470A* | 1″ X-Series Dual Nozzle/Part Circle Rotor, Electric VIH, Acme |
D55XH2514A* | 1″ X-Series Dual Nozzle/Part Circle Rotor, Hydraulic VIH, Acme |
DIMENSIONS
POP-UP HEIGHT: 4″ (10 cm)
BODY HEIGHT:
9 3⁄4″ (24.8 cm) D50/D55C Series, D50/D55E Series and D50/D55H Series
8 1⁄4″ (20.9 cm) D50B Series
TOP DIAMETER:
6 1⁄2″ (17.1 cm) D50/D55C Series, D50/D55E Series and D50/D55H Series
6″ (15.2 cm) D50B Series
INLET SIZE
1″ (25.4 mm) female NPT
1″ (25.4 mm) female BSP
1″ (25.4 mm) female Acme
OPERATING RANGE
50-80 psi (3.4 – 5.5 bar)
MAXIMUM PRESSURE
100 psi (6.9 bar)
MINIMUM PRESSURE
40 psi (2.7 bar)
CHECK VALVE MODELS
Holds back up to 15′ (4.5 m) difference in elevation
Pressure regulation (electric model only) 60, 70 (standard pressure), or 80 PSI
Reclaimed water versions available
*Inlet type
A – Acme (Standard)
N – NPT
B – BSP