Project Description

Bronze Bullet
Commercial Valve


  • 10 year trade warranty and 100% water tested
  • 225 PSI (15.5 BAR) rating
  • S24B high-efficiency solenoid for positive opening at high pressures; includes stainless steel actuator and brass threads for long life
  • Bronze body and cover with stainless steel bolts
  • Bronze material with 82% copper content
  • Reverse flow design for water conservation in the event of failure
  • Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
  • Brass shock cone for smooth operation and reduction of water hammer
  • Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
  • Brass non-rising flow control stem throttles valve from full open to closed position
  • Excellent for low volume irrigation
  • Contamination-resistant (CR)
  • Chlorine- and chloramine-resistant EPDM diaphragm material


  • XPR Pressure Regulator–the Weathermatic XPR pressure regulating module senses inlet pressure and maintains constant outlet pressure. (see PRK-24 in valve accessory section for specifications)
  • Non-potable alert flow handle may be substituted for the standard flow handle. Add -NP suffix.


100 gallons
per valve




Model Description Length Width Height
8200CR-10D 1” Red Brass Valve – 24VAC with Flow Control 4.75” (12.07 cm) 3.63” (9.22 cm) 5.25” (13.34 cm)
8200CR-12D 1 1⁄4” Red Brass Valve – 24VAC with Flow Control 4.75” (12.07 cm) 3.63” (9.22 cm) 5.25” (13.34 cm)
8200CR-15D 1 1⁄2” Red BrassValve – 24VAC with Flow Control 5.06″ (12.85 cm) 4.00″ (10.16 cm) 5.75″ (14.61 cm)
8200CR-20D 2” Red Brass Valve – 24VAC with Flow Control 6.63” (16.84 cm) 4.88″ (12.40 cm) 7.25″ (18.42 cm)
8200CR-25D 2 1⁄2” Red Brass Valve – 24VAC with Flow Control 8.00” (20.32 cm) 6.25″ (15.88 cm) 8.00″ (20.32 cm)
8200CR-30D 3” Red Brass Valve – 24VAC with Flow Control 8.75″ (22.23 cm) 7.00″ (17.78 cm) 8.50″ (21.59 cm)

0.2 to 400 GPM (0 to 90.0 m3/hr)

24VAC/60HZ 24VAC/50Hz
Inrush: 9.86 VA Inrush: 10.7 VA
Holding: 5.69 VA Holding: 7.5 VA

Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups



Bronze Bullet Sales Sheet
pdf Download
Bronze Bullet Sales Sheet
Bronze Bullet Technical Specification
pdf Download
Bronze Bullet Technical Specification

    Design Specifications

      Select category or search...