Project Description
Bronze Bullet
Commercial Valve

FEATURES
- 10 year trade warranty and 100% water tested
- 225 PSI (15.5 BAR) rating
- S24B high-efficiency solenoid for positive opening at high pressures; includes stainless steel actuator and brass threads for long life
- Bronze body and cover with stainless steel bolts
- Bronze material with 82% copper content
- Reverse flow design for water conservation in the event of failure
- Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
- Brass shock cone for smooth operation and reduction of water hammer
- Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
- Brass non-rising flow control stem throttles valve from full open to closed position
- Excellent for low volume irrigation
- Contamination-resistant (CR)
- Chlorine- and chloramine-resistant EPDM diaphragm material
OPTIONS (FACTORY INSTALLED)
- XPR Pressure Regulator–the Weathermatic XPR pressure regulating module senses inlet pressure and maintains constant outlet pressure. (see PRK-24 in valve accessory section for specifications)
- Non-potable alert flow handle may be substituted for the standard flow handle. Add -NP suffix.
WATER WITH PURPOSE
100 gallons
per valve
MODELS

8200CR
PRODUCT SPECIFICATIONS
Model | Description | Length | Width | Height |
---|---|---|---|---|
8200CR-10D | 1” Red Brass Valve – 24VAC with Flow Control | 4.75” (12.07 cm) | 3.63” (9.22 cm) | 5.25” (13.34 cm) |
8200CR-12D | 1 1⁄4” Red Brass Valve – 24VAC with Flow Control | 4.75” (12.07 cm) | 3.63” (9.22 cm) | 5.25” (13.34 cm) |
8200CR-15D | 1 1⁄2” Red BrassValve – 24VAC with Flow Control | 5.06″ (12.85 cm) | 4.00″ (10.16 cm) | 5.75″ (14.61 cm) |
8200CR-20D | 2” Red Brass Valve – 24VAC with Flow Control | 6.63” (16.84 cm) | 4.88″ (12.40 cm) | 7.25″ (18.42 cm) |
8200CR-25D | 2 1⁄2” Red Brass Valve – 24VAC with Flow Control | 8.00” (20.32 cm) | 6.25″ (15.88 cm) | 8.00″ (20.32 cm) |
8200CR-30D | 3” Red Brass Valve – 24VAC with Flow Control | 8.75″ (22.23 cm) | 7.00″ (17.78 cm) | 8.50″ (21.59 cm) |
FLOW RANGE
0.2 to 400 GPM (0 to 90.0 m3/hr)
ELECTRICAL
24VAC/60HZ 24VAC/50Hz
Inrush: 9.86 VA Inrush: 10.7 VA
Holding: 5.69 VA Holding: 7.5 VA
Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups