Project Description
6000E Pro
Professional Series Rotor
FEATURES
- Bayonet protective cap.
- NIR2 feature (Nozzle Insertion/Radius Reduction) on all models eliminates the need to remove the cap for nozzle adjustments.
- Eight interchangeable Acu-Cover nozzles ranging from 1.0 to 9.5 gpm (0,23 – 2,16 m3/hr).
- Seven optional low-angle nozzles (13°) for windy areas or for throwing under trees.
- Proven reliability of the water driven gear motor.
- 6012 Pro pops up a full 12” (30,5 cm). Ideal for shrubs and ground cover areas, at the base of hillsides where risers are not appropriate and where liability is a concern.
- Click-Set® collars are quick and easy to adjust.
- Continuous 360° rotation or part-circle adjustable 40° to 310°.
- Ratcheting slip clutch protects gears and motor from damage while adjusting turret for part-circle adjustments – wet or dry.
- Wrench, piston clamp and installation instructions included (Model 6001 has no clamp).
WATER WITH PURPOSE
50 gallons
per rotor
MODELS
6000E
6000RW
6001
6005
6012
PRODUCT SPECIFICATIONS
| Model | Description | Pop-Up Height | Body Height |
|---|---|---|---|
| 6000E | 6000E-Pro | 4″ (10 cm) | 7 3⁄8” (18.7 cm) |
| 6000RW | 6000-Pro for Reclaimed Water | 4″ (10 cm) | 7 3⁄8” (18.7 cm) |
| 6000-7 | 6000-Pro with #7 Nozzle, Factory Installed | 4″ (10 cm) | 7 3⁄8” (18.7 cm) |
| 6001 | 6000-Pro Shrub Head | 7 1⁄2” (18.7 cm) | |
| 6002 | 6000-Pro with ADV | 4″ (10 cm) | 7 3⁄8” (18.7 cm) |
| 6005 | 6000-Pro with Stainless Steel Riser and ADV | 4″ (10 cm) | 7 3⁄8” (18.7 cm) |
| 6012 | 6000-Pro 12″ High-pop, with ADV | 12″ (30.5 cm) | 16 7⁄8″ (43 cm) |
EXPOSED CAP DIAMETER:
1 7⁄8″ (4.7 cm)
CAP DIAMETER:
2 7⁄8″ (7.3 cm)
INLET SIZE:
3⁄4″ (19 mm) Female (NPT and BSP)
SCREEN MESH:
.045 sq. in. (1.14 mm2) / 1150 micron
OPERATING RANGE
20 – 65 PSI (1.4 – 4.5 BAR) (6000E, 6001, 6002)
25 – 65 PSI (1.7 – 4.5 BAR) (6005, 6012)
PRECIPITATION RATE
0.21 – 1.02” per hour (5.4 – 25.9 mm per hour)
RADIUS
23 – 51’ (6.9 – 15.6 m)
PRESSURE
20 – 65 PSI (3.1 – 5.2 BAR)
FLOW
1.0 – 9.5 GPM (0.23 – 2.16 m3/hr)
SPRAY TRAJECTORY
25° (standard nozzle); 13° (low angle nozzle)
TYPE OF CAP
Rubber with locking screw
ADV MODELS
Holds back up to 10’ (3 m) difference in elevation
