Project Description

6000E Pro
Professional Series Rotor

FEATURES

  • Bayonet protective cap.
  • NIR2 feature (Nozzle Insertion/Radius Reduction) on all models eliminates the need to remove the cap for nozzle adjustments.
  • Eight interchangeable Acu-Cover nozzles ranging from 1.0 to 9.5 gpm (0,23 – 2,16 m3/hr).
  • Seven optional low-angle nozzles (13°) for windy areas or for throwing under trees.
  • Proven reliability of the water driven gear motor.
  • 6012 Pro pops up a full 12” (30,5 cm). Ideal for shrubs and ground cover areas, at the base of hillsides where risers are not appropriate and where liability is a concern.
  • Click-Set® collars are quick and easy to adjust.
  • Continuous 360° rotation or part-circle adjustable 40° to 310°.
  • Ratcheting slip clutch protects gears and motor from damage while adjusting turret for part-circle adjustments – wet or dry.
  • Wrench, piston clamp and installation instructions included (Model 6001 has no clamp).

WATER WITH PURPOSE

50 gallons
per rotor

MODELS

6000E

6000RW

6001

6005

6012

PRODUCT SPECIFICATIONS

ModelDescriptionPop-Up HeightBody Height
6000E6000E-Pro4″ (10 cm)7 3⁄8” (18.7 cm)
6000RW6000-Pro for Reclaimed Water4″ (10 cm)7 3⁄8” (18.7 cm)
6000-76000-Pro with #7 Nozzle, Factory Installed4″ (10 cm)7 3⁄8” (18.7 cm)
60016000-Pro Shrub Head7 1⁄2” (18.7 cm)
60026000-Pro with ADV4″ (10 cm)7 3⁄8” (18.7 cm)
60056000-Pro with Stainless Steel Riser and ADV4″ (10 cm)7 3⁄8” (18.7 cm)
60126000-Pro 12″ High-pop, with ADV12″ (30.5 cm)16 7⁄8″ (43 cm)

EXPOSED CAP DIAMETER:
1 7⁄8″ (4.7 cm)

CAP DIAMETER:
2 7⁄8″ (7.3 cm)

INLET SIZE:
3⁄4″ (19 mm) Female (NPT and BSP)

SCREEN MESH:
.045 sq. in. (1.14 mm2) / 1150 micron

OPERATING RANGE
20 – 65 PSI (1.4 – 4.5 BAR) (6000E, 6001, 6002)
25 – 65 PSI (1.7 – 4.5 BAR) (6005, 6012)

PRECIPITATION RATE
0.21 – 1.02” per hour (5.4 – 25.9 mm per hour)

RADIUS
23 – 51’ (6.9 – 15.6 m)

PRESSURE
20 – 65 PSI (3.1 – 5.2 BAR)

FLOW
1.0 – 9.5 GPM (0.23 – 2.16 m3/hr)

SPRAY TRAJECTORY
25° (standard nozzle); 13° (low angle nozzle)

TYPE OF CAP
Rubber with locking screw

ADV MODELS
Holds back up to 10’ (3 m) difference in elevation

DOCUMENTS

Literature

6000 Pro Rotor Installation Instructions
6000 Pro Rotor Installation Instructions
pdf Download
6000E Pro Rotor Sales Sheet
6000E Pro Rotor Sales Sheet
pdf Download
6000E Pro Series Rotor Technical Specifications
6000E Pro Series Rotor Technical Specifications
pdf Download

    Design Specifications

    CAD Detail - 6012 - 3 Elbow Swing Joint
    (updated: June 4, 2020)

    6012 - 3 Elbow Swing Joint
    FileAction
    6012ELB.pdfDownload 
    6012ELB.dwgDownload 

    CAD Detail - 6001 - PVC Nipple
    (updated: June 4, 2020)

    6001 - PVC Nipple
    FileAction
    6001Rigidpvc.pdfDownload 
    6001Rigidpvc.dwgDownload 

    CAD Detail - 6001 - Elbow Swing Joint
    (updated: June 4, 2020)

    6001 - Elbow Swing Joint
    FileAction
    6001ELB.pdfDownload 
    6001ELB.dwgDownload 

    CAD Detail - 6000 - Flexible Swing Pipe
    (updated: June 4, 2020)

    6000 - Flexible Swing Pipe
    FileAction
    6000flex.pdfDownload 
    6000flex.dwgDownload 

    CAD Detail - 6000 - 3 Elbow Swing Joint
    (updated: June 4, 2020)

    6000 - 3 Elbow Swing Joint
    FileAction
    6000ELB.pdfDownload 
    6000ELB.dwgDownload 

      Written Specification - 6000E Pro Rotor
      (updated: June 4, 2020)

      6000E Pro Rotor
      FileAction
      6000_Written_Specification.pdfDownload 
      6000_Written_Specification.docxDownload 

      CSI Specification - 6000E Pro Rotor
      (updated: June 3, 2020)

      6000E Pro Rotor
      FileAction
      CSI Specification - 6000E Rotor.pdfDownload 
      CSI Specification - 6000E Rotor.docxDownload