SmartLink by Weathermatic   |    Catalogs    |    Support

Weathermatic
Weatherematic
CATALOGS   |   SUPPORT SmartLink by Weathermatic
Weathermatic

D70 Series Nozzle Installation Guide

Print

REPLACES: Rain Bird® 51D Series Impact Sprinklers

STEP 1: Remove Drive Assembly

STEP 2: Install New Nozzle

  1. Twist off nozzle/cap (counterclockwise).
  2. Pull off nozzle assembly.
  3. Snap in correct nozzle. (see Performance Chart)

FOR WINDY CONDITIONS
Turn short range nozzle to vertical position to improve distribution patterns.

NORMAL
WINDY

STEP 3: Re-Install Drive Assembly

  1. Place new assembly in body.
  2. Install new snap ring.
  3. Reinstall nozzle/cap assembly. (twist on clockwise)

NOTE: Cap is self-tightening, no need to overtighten.

🔗 Performance Data

Table of Contents
Go to Top