What does the PAUSE indication mean on my SmartLine controller?

You are here:

It means that your controller has temporarily paused irrigation due to a setting in the programming for Omit Time, Rain Delay or cycle/soak to prevent water runoff.

If you are using an SLW series weather station, the controller will also pause for a period of time (48 hours is default) after a rain sensor shutdown. The controller will resume watering at the first scheduled start time after the pause. If you want to delete the 48-hour pause, just press the sensor button to put the unit into bypass and then press the button again to put the sensor mode back to active. The LED will be green. The controller will also show PAUSE momentarily when it switches from one zone to another zone.

Table of Contents
Go to Top