FEATURES			DOWNLOADS Catalog page Nitro Nine Installation and Operation Troubleshooting Technical Specifications  MODELS Click here to view models.
100% water tested 150 psi (10,3 bar) rating Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure Reverse flow design for water conservation in the event of failure Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action Molded shock cone for smooth operation and reduction of water hammer Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions Marine-grade S20P solenoid with stainless steel actuator Engineering grade PVC body and cover with combination hex, slot and Phillips retaining screws Non-rising flow control stem throttles valve from full open to closed position on flow control models
MODELS
DOWNLOADS     Tech Specs - PDF Tech Specs - RTF/DOC   Part# Description  DWG DXF High Res JPG N-100-H 1" FIP*     N-100.jpg  (3 MB) N-100F-H 1" FIP with flow control* N100F.dwg  N100F.dxf N-100F.jpg (3 MB) N-100S-H 1" SLIPxSLIP      N-100S.jpg (3 MB) N-100SF-H 1" SLIPxSLIP with flow control     N-100SF.jpg (3 MB) N-100MB-H 1" Male x Barb     N-100MB.jpg (2 MB) N-100MBF-H 1" Male x Barb with flow control     N-100MBF.jpg (3 MB) *International specify ISO  To download files, right-click and select "Save As..."
ELECTRICAL
Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups 24VAC/60Hz 24VAC/50Hz Inrush: 9.48 VA Inrush: 10.66 VA Holding: 5.11 VA Holding: 5.97 VA Do not use nominal voltage ratings listed above for sizing of valve wires.